碟片式离心机是一种普遍使用的分离设备，它的机械结构简单，分离效率高，耐用性强，是众多分离设备中的佼佼者。碟片式离心机主要由机壳、旋转轴、电机、碟片、转子等部件组成，主要用于各种悬浮物质和溶质的分离，比如颗粒物的分离，也可以是液体的分离。

Disc centrifuge is a kind of widely used separation equipment, its mechanical structure is simple, high separation efficiency, strong durability, is the leader of many separation equipment. Disc centrifuge is mainly composed of housing, rotating shaft, motor, disc, rotor and other components, mainly used for various suspended substances and solute separation, such as the separation of particulate matter, can also be liquid separation.

　　一、碟片式离心机的结构 The structure of disc centrifuge

　　碟片式离心机由电机、离心机头、离心轮、磨砂轮、润滑装置、振动限位装置、冷却装置、控制器等组成，其中离心机头是重要的部件，它的工作原理是：通过电机带动离心轮旋转，离心轮上的碟片将混合物分离，达到提取的目的。

Disc type centrifuge consists of motor, centrifuge head, centrifugal wheel, grinding wheel, lubrication device, vibration limit device, cooling device, controller and so on. The centrifuge head is an important component. Its working principle is: through the motor to drive the centrifugal wheel to rotate, the disc on the centrifugal wheel will separate the mixture to achieve the purpose of extraction.

　　二、碟片式离心机的操作步骤 Operation procedure of disc centrifuge

　　1.安装：将碟片式离心机与电源线连接，并确保接地线工作正常。提醒：安装前应先检查电源是否符合本机规格要求。

　　2.调试：打开电源开关，调整控制器的运行参数，确保设备正常运行。提醒：调试时应注意设备的温度、压力等参数。

　　3.操作：将所需要提取的物料放入离心机，按下开始按钮，设备便开始运行，提取完毕后，关闭电源开关。提醒：操作时应注意设备的安全，禁止擅自调整设备参数。

1. Installation: Connect the disk-type centrifuge with the power cord, and ensure that the grounding wire works properly. Reminder: Check whether the power supply meets the specifications of the machine before installation.

2. Commissioning: Turn on the power and adjust the running parameters of the controller to ensure the normal running of the device. Reminder: pay attention to the temperature, pressure and other parameters of the equipment during debugging.

3. Operation: Put the material to be extracted into the centrifuge, press the start button, and the equipment will start to run. After extraction, turn off the power switch. Reminder: Pay attention to the safety of the device during operation. Do not adjust the device parameters without authorization.

　　三、碟片式离心机的安全操作 Safe operation of disc centrifuge

　　1.在使用碟片式离心机之前，应先检查设备的安全装置，确保其正常工作。

　　2.操作时应注意设备的安全，禁止擅自调整设备参数。

　　3.在离心机工作的过程中，应定期检查润滑油，确保设备处于良好的工作状态。

　　4.定期检查离心机内部的温度、压强等参数，确保设备可以正常运行，并及时发现故障。

1. Before using disk-type centrifuge, check the safety device of the equipment to ensure its normal operation.

2. Pay attention to device safety during operation. Do not adjust device parameters without authorization.

3. In the process of centrifuge operation, the lubricating oil should be checked regularly to ensure that the equipment is in good working condition.

4. Periodically check the internal parameters of the centrifuge, such as temperature and pressure, to ensure the normal operation of the equipment and timely detection of faults.

　　四、碟片式离心机的注意事项 Precautions for disc centrifuge

　　1.碟片式离心机的运行环境温度应控制在10℃-45℃之间。

　　2.操作时，应避免脚踏开关接触不良，以免出现故障。

　　3.使用碟片式离心机时，应将设备处于安全环境，禁止设备暴露在高温、潮湿等不利环境中。

　　4.操作时，应注意设备的安全，禁止擅自调整设备参数，以免造成损坏。

1 disc centrifuge operating environment temperature should be controlled between 10℃-45℃.

2. During operation, avoid poor contact with the foot switch to avoid failure.

3. When using disk-type centrifuge, the equipment should be placed in a safe environment, and it is prohibited to expose the equipment to high temperature, humidity and other adverse environment.

4. Pay attention to the safety of the device during operation. Do not adjust the device parameters without authorization to avoid damage.

　　碟片式离心机的使用攻略就是以上内容，希望能够帮助大家正确使用设备，发挥它的功能。

The use of disc centrifuge is the above content, hope to help you use the equipment correctly, play its function.