卧式离心机 (Horizontal centrifuge)
- 分类:企业新闻
- 作者:
- 来源:
- 发布时间:2020-01-07
- 访问量:19
【概要描述】卧式离心机工作原理是悬浮液在转鼓中快速旋转,在离心力作用下,液体轻而靠近转子中心,比重大的固体颗粒因离心力大而沉降到转鼓壁,实现液、固分层而达到最终分离的目的。
The working principle of horizontal centrifuge is that the suspended liquid rotates rapidly in the drum. Under the action of centrifugal force, the liquid is light and close to the center of the rotor, and the larger solid particles settle to the wall of the drum due to the larger centrifugal force, so as to realize the separation of liquid and solid layers and achieve the purpose of final separation.
卧式离心机 (Horizontal centrifuge)
【概要描述】卧式离心机工作原理是悬浮液在转鼓中快速旋转,在离心力作用下,液体轻而靠近转子中心,比重大的固体颗粒因离心力大而沉降到转鼓壁,实现液、固分层而达到最终分离的目的。
The working principle of horizontal centrifuge is that the suspended liquid rotates rapidly in the drum. Under the action of centrifugal force, the liquid is light and close to the center of the rotor, and the larger solid particles settle to the wall of the drum due to the larger centrifugal force, so as to realize the separation of liquid and solid layers and achieve the purpose of final separation.
- 分类:企业新闻
- 作者:
- 来源:
- 发布时间:2020-01-07
- 访问量:19
卧式离心机工作原理是悬浮液在转鼓中快速旋转,在离心力作用下,液体轻而靠近转子中心,比重大的固体颗粒因离心力大而沉降到转鼓壁,实现液、固分层而达到最终分离的目的。
The working principle of horizontal centrifuge is that the suspended liquid rotates rapidly in the drum. Under the action of centrifugal force, the liquid is light and close to the center of the rotor, and the larger solid particles settle to the wall of the drum due to the larger centrifugal force, so as to realize the separation of liquid and solid layers and achieve the purpose of final separation.
卧式离心机的优势:
1.卧式离心机防止了离心机进料对沉渣的冲击,是因为使用的螺旋进料屏蔽技术,增加了沉降能力。
2.使用特殊排料设计,降低出泥含液率,增大了螺旋内部挤压力,运行中不会堵料,改善了排渣条件,保证排渣的顺畅。
3.卧式离心机比别的同类产品节约能耗百分之十五以上,是因为特殊的溢流口设计。
4.工作转速下机器动平衡校正,确保整机在工作状态下稳定与平衡。
5.卧式离心机排渣含水率达到设计要求并在离心机运行过程中保持一致,是因为辅机扭矩控制。
Advantages of horizontal centrifuge:
1. Horizontal centrifuge can prevent the impact of centrifuge feed on sediment, because the spiral feed shielding technology is used to increase the settling ability.
2. The use of special discharging design, reduce the liquid content of the mud, increase the screw internal extrusion pressure, the operation will not block material, improve the conditions of slag discharge, ensure the smooth discharge of slag.
3. Compared with other similar products, horizontal centrifuge can save more than 15% energy consumption because of the special overflow port design.
4. Calibrate the dynamic balance of the machine under the working speed to ensure the stability and balance of the whole machine under the working state.
5. The moisture content of discharge slag of horizontal centrifuge meets the design requirements and remains consistent during centrifuge operation, because of the torque control of auxiliary machine.
卧式离心机的技术特点:
1.卧式离心机处理能力大、体积小、对环境友好、便于操作、易于自动化控制、分离效果好。
2.卧式离心机性能可靠、结构牢固、使用寿命长。
3.卧式离心机转子设有防磨蚀措施,无需保护,在寿命周期内很少磨损。转鼓内壁焊有专门的防磨筋条,螺旋推料面焊有堆焊耐磨焊条或者耐磨合金片。
4.使用双电机、双变频驱动启动平缓,分离因数与转鼓转速无级可调,可满足不同浓度的悬浮液分离。辅变频电流反馈到主变频器,节能效果明显。
Technical characteristics of horizontal centrifuge:
1. Horizontal centrifuge has large processing capacity, small volume, friendly to the environment, easy to operate, easy to automate control, and good separation effect.
2. Horizontal centrifuge has reliable performance, firm structure and long service life.
3. The rotor of horizontal centrifuge is equipped with anti-abrasion measures, without protection, and rarely wears in the life cycle.
The inner wall of the drum is welded with a special anti-wear bar, and the surface of the spiral push material is welded with a surfacing wear-resistant electrode or wear-resistant alloy sheet.
4. Double motor and double frequency conversion drive are used to start gently, and the separation factor and the rotating speed of the drum are stepless adjustable, which can satisfy the separation of suspension of different concentrations.
The auxiliary frequency conversion current feedback to the main frequency converter, energy saving effect is obvious.
扫二维码用手机看







南京莫尼亚离心机科技发展有限公司
联系人: 陈永欣 18013325617
徐锋 18013035617
售后服务: 赵士波 18013344029
电话/传真:025-58474011
邮箱: molniya@126.com
网址:www.njmoniya.cn
公司地址:江苏省南京市六合区竹镇工业园凌峰路71号
General Sales Agent for Iran, Iraq and Syria:
Company: ROYESH BEDONE MAX.LTD
Contact: Mr. GHASEM AMANI
Telephone number: 0098 912 111 2893
Mail box: robimaxfactory@gmail.com

- 手机版 莫尼亚 -