碟片式离心机已经在生物技术领域中用于分离微生物和类似产品多年。 在发酵过程的最 新进展中，特别是在基因工程方面，需要具有特殊性质的更高效的离心机。

Disk centrifuges have been used in biotechnology for years to separate microorganisms and similar products. The most recent advances in fermentation, especially in genetic engineering, require more efficient centrifuges with specific properties.

  碟片式离心机在日常使用中应注意：

1.碟片式离心机具有坚实的安装基础。 如果在楼上，则应将其安装在支撑梁上，并留出一定的维护空间。

2.碟片式离心机的组装应使用手摇转鼓，该转鼓应具有挠性且无卡阻现象。

3.在启动分离器之前，请检查是否释放了制动器（制动器），齿轮箱中的油位是否正确以及电动机已转动，尤其是在启动新机器或对电动机设备进行检修之后。

4.由于分离器滚筒的转动惯量大，因此其启动电流大且持续时间长，因此电气设备和线路应能够承受较大的负载。

5.启动碟片式离心机时，如果振动异常，请立即停止机器并检查滚筒组件。

6.严禁在机器停止前拆解碟片式离心机。

7.不允许将转鼓上的零件与转鼓上的零件互换。

8.一段时间不使用碟片式离心机时，应清洁滚筒，并断开主电机和辅助电机的电源。

9.碟片式离心机遵循安全操作程序并按照说明进行操作。

10.始终按照制造商的建议进行拆卸，组装，操作和维护，并按顺序进行。

Attention should be paid to the disc centrifuge in daily use:

1. The disc centrifuge has a solid installation base.
If upstairs, it should be installed on the support beams and allow some space for maintenance.

2. The assembly of disc centrifuge should use hand drum, which should be flexible and free of jam phenomenon.

3. Before starting the separator, check that the brakes (brakes) are released, that the oil level in the gearbox is correct and that the motor has rotated, especially after starting the new machine or servicing the motor equipment.

4. Because of the large moment of inertia of the separator drum, its starting current is large and lasts for a long time, so the electrical equipment and lines should be able to bear a large load.

5. When starting the disc centrifuge, if the vibration is abnormal, please stop the machine immediately and check the drum components.

6. It is strictly prohibited to disassemble the disc centrifuge before the machine stops.

7. The parts on the drum are not allowed to be interchanged with those on the drum.

8. When the disc centrifuge is not used for a period of time, the drum should be cleaned and the power supply of the main motor and auxiliary motor should be disconnected.

9. Disk centrifuges follow safe operating procedures and follow instructions.

10. Always disassemble, assemble, operate and maintain in accordance with manufacturer's recommendations and in sequence.