啊啊

NEWS CENTER

新闻动态

您现在的位置:
首页
/
/
炼化三泥处理 :污油泥处理技术设备工艺流程 (Refining and chemical sludge treatment: sludge treatment technology and equipment process flow)

炼化三泥处理 :污油泥处理技术设备工艺流程 (Refining and chemical sludge treatment: sludge treatment technology and equipment process flow)

  • 分类:新闻资讯
  • 作者:
  • 来源:
  • 发布时间:2020-07-22
  • 访问量:0

【概要描述】对于炼化三泥处理,开发了污油泥处理技术设备,其工艺流程主要如下:
冲砂废水通过进料管进入高效节能固液分离一体机,进料管由自动沉降装置和离心分离装置组成。通过自然沉降,上清液流入回收罐,沉降后的泥浆进入离心分离装置进行进一步的固液分离。该污油泥处理技术设备可连续运行24小时,不仅提高了分离效率,而且节约了能源消耗,使处理后的洗沙废水清水可以回用。



For the treatment of three sludges in refining and chemical process, the technical equipment of sludge treatment has been developed, and the process flow is mainly as follows:
Sand washing wastewater enters the high efficiency and energy saving solid-liquid separation machine through the feed pipe, which is composed of automatic settling device and centrifugal separation device.
Through natural settlement, the supernatant flows into the recovery tank, and the settled mud enters the centrifugal separation unit for further solid-liquid separation.
The sewage sludge treatment technology equipment can run continuously for 24 hours, which not only improves the separation efficiency, but also saves energy consumption, so that the treated sand washing wastewater and water can be reused.

炼化三泥处理 :污油泥处理技术设备工艺流程 (Refining and chemical sludge treatment: sludge treatment technology and equipment process flow)

【概要描述】对于炼化三泥处理,开发了污油泥处理技术设备,其工艺流程主要如下:
冲砂废水通过进料管进入高效节能固液分离一体机,进料管由自动沉降装置和离心分离装置组成。通过自然沉降,上清液流入回收罐,沉降后的泥浆进入离心分离装置进行进一步的固液分离。该污油泥处理技术设备可连续运行24小时,不仅提高了分离效率,而且节约了能源消耗,使处理后的洗沙废水清水可以回用。



For the treatment of three sludges in refining and chemical process, the technical equipment of sludge treatment has been developed, and the process flow is mainly as follows:
Sand washing wastewater enters the high efficiency and energy saving solid-liquid separation machine through the feed pipe, which is composed of automatic settling device and centrifugal separation device.
Through natural settlement, the supernatant flows into the recovery tank, and the settled mud enters the centrifugal separation unit for further solid-liquid separation.
The sewage sludge treatment technology equipment can run continuously for 24 hours, which not only improves the separation efficiency, but also saves energy consumption, so that the treated sand washing wastewater and water can be reused.

  • 分类:新闻资讯
  • 作者:
  • 来源:
  • 发布时间:2020-07-22
  • 访问量:0
详情

对于炼化三泥处理,开发了污油泥处理技术设备,其工艺流程主要如下:

For the treatment of the three sludges in refining and chemical process, the technical equipment of sludge treatment has been developed, and the process flow is mainly as follows:

 


冲砂废水通过进料管进入高效节能固液分离一体机,进料管由自动沉降装置和离心分离装置组成。通过自然沉降,上清液流入回收罐,沉降后的泥浆进入离心分离装置进行进一步的固液分离。该污油泥处理技术设备可连续运行24小时,不仅提高了分离效率,而且节约了能源消耗,使处理后的洗沙废水清水可以回用。

Sand washing wastewater enters the high efficiency and energy saving solid-liquid separation machine through the feed pipe, which is composed of automatic settling device and centrifugal separation device. Through natural settlement, the supernatant flows into the recovery tank, and the settled mud enters the centrifugal separation unit for further solid-liquid separation. The sewage sludge treatment technology equipment can run continuously for 24 hours, which not only improves the separation efficiency, but also saves energy consumption, so that the treated sand washing wastewater and water can be reused.

 


自动进料:采用专门设计的斗式污泥提升功能,输送液体、固体和半固体含油污泥,直接将含油污泥从污泥池送至移动式预处理装置,满足连续进料。此外,斗式提升机进料口设有一级除杂网槽,可防止丝带、木棒等大杂质进入加工系统。

Automatic feeding: the specially designed bucket sludge lifting function is adopted to transport liquid, solid and semi-solid oily sludge and directly send oily sludge from sludge tank to mobile pretreatment device to meet continuous feeding. In addition, the bucket elevator feed port is provided with a level of miscellaneous net slot,  it can prevent large impurities such as ribbon, wood rod into the processing system.

 


炼化三泥处理处理:预处理装置入口处的含油污泥由污泥分选轮和筛板驱动,聚集在一起的污泥通过污泥分选轮的旋转而分散。污泥中大于20毫米的颗粒被分选轮推入预处理装置一侧的大料收集箱,小于20毫米的污泥通过污泥分选筛板的筛孔进入污泥预处理池。通过含油污泥分离轮和筛板的共同作用,实现含油污泥的除杂、纤维粉碎、均匀分散、油浆储存和输送。

Refining and three sludge treatment: the oil-bearing sludge at the inlet of the pretreatment device is driven by the sludge sorting wheel and the sieve plate, and the aggregated sludge is dispersed by the rotation of the sludge sorting wheel. Particles larger than 20 mm in the sludge are pushed into the aniseed collection box at one side of the pretreatment device by the sorting wheel, while the sludge less than 20 mm enters the sludge pretreatment tank through the sieve holes of the sludge separation screen plate. Through the joint action of oil-bearing sludge separation wheel and sieve plate, the oil-bearing sludge can be removed impurity, fiber crushing, evenly dispersed, oil slurry storage and transportation.

 


清洗:在含油污泥一级、二级、三级清洗装置中完成。通过化学药剂、超声波、气浮和搅拌的作用,实现了油泥的流化、清洗和游离原油的脱除。

Cleaning: it is completed in the first, second and third cleaning equipment of oily sludge. Fluidization, cleaning and free crude oil removal are realized by chemical agents, ultrasonic wave, air flotation and stirring.

 


污油泥处理技术设备固液分离:利用高效节能的固液分离器实现固体污泥与液体的分离。

Solid - liquid separation: the solid - liquid separator with high efficiency and energy saving is used to realize the separation of solid sludge and liquid.

 


油水处理:三级清洗装置收集的浮油输送到油箱,从油箱沉淀出来的水输送到水箱。高效节能固液分离器分离出的液体进入水箱,水箱中的浮油可以收集并输入油箱,热水可以作为循环水重复使用。

Oil and water treatment: the oil slick collected by the three-stage cleaning device is transported to the tank, and the water deposited from the tank is transported to the tank. The liquid separated by the efficient and energy-saving solid-liquid separator enters the tank, where the oil slick can be collected and fed into the tank, and the hot water can be reused as circulating water.

 

 

关键词:

扫二维码用手机看

碟片式离心机的使用技巧(The use of disc centrifuge skills)
 碟片式离心机是一种新型的离心分离机,它是由一个碟状盘片和一个完整的离心机组成的。这种离心机具有高精度、低噪音等优点,它可以实现高浓度悬浮物的有效分离。由两个部分组成:碟片和完整的离心机。 Disk-type centrifuge is a new type of centrifuge, which is composed of a disk-like plate and a complete centrifuge. The centrifuge has the advantages of high precision and low noise, and it can realize the effective separation of high concentration of suspended matter. It consists of two parts: the disc and the complete centrifuge.
查看详情 白箭头 黑箭头
碟片式离心机的主要结构概述 (Overview of the main structure of disc centrifuge)
碟片式离心机的主要结构概述   碟片式离心机主要由进出口装置、滚筒、盖子、立轴、水平轴、底座、电机和自动控制箱组成。 Overview of the main structure of disc centrifuge Disc centrifuge is mainly composed of import and export device, drum, cover, vertical shaft, horizontal shaft, base, motor and automatic control box. 1. Import and export equipment In addition to visually viewing the liquid conditions before and after separation of the disk-type centrifuge, the inlet and outlet devices can also be adjusted by regulating the flow control valve on the device to adjust its separation effect. A sampling device is installed on the upper part of the cover to realize water separation through sampling and testing.   1.进出口设备   除了直观地看到碟片式离心机分离前后的液体状况外,入口和出口装置还可以通过调节装置上的流量调节阀来调节其分离效果。机盖上部安装有取样装置,通过取样和测试实现水分离。
查看详情 白箭头 黑箭头
碟片式离心机的原理是什么?(What is the principle of disc centrifuge?)
碟片式离心机的原理是什么?   按功能可分为固液分离型和固液分离型两种。固液两用碟片式离心机是碟片式离心机之一。它是一种效率高、产量大、自动化程度高的先进设备。碟片式离心机仅适用于分离固体含量低的悬浮液和比重差小的互不溶性液体。 What is the principle of disc centrifuge? According to the function can be divided into solid-liquid separation type and solid-liquid separation type two. Solid - liquid dual - purpose disc centrifuge is one of the disc centrifuges. It is a kind of advanced equipment with high efficiency, large output and high degree of automation. Disc centrifuge is only suitable for separating suspension with low solid content and insoluble liquid with small specific gravity difference.
查看详情 白箭头 黑箭头
莫尼亚

南京莫尼亚离心机科技发展有限公司

联系人:   陈永欣 18013325671 

                 徐锋    18013035671

售后服务: 赵士波 18013344029
电话/传真:025-58474011
邮箱: molniya@126.com

网址:www.njmoniya.cn
公司地址:江苏省南京市六合区竹镇工业园凌峰路71号

General Sales Agent for Iran, Iraq and Syria:

Company: ROYESH BEDONE MAX.LTD

Contact: Mr. GHASEM AMANI

Telephone number: 0098 912 111 2893

Mail box: robimaxfactory@gmail.com

莫尼亚

- 手机版  莫尼亚 -

Copyright © 2019 南京莫尼亚离心机科技发展有限公司

网站建设:中企动力 南京

苏ICP备2020058610号-1

SEO 标签