啊啊

NEWS CENTER

新闻动态

您现在的位置:
首页
/
/
/
离心机厂家:卧螺机的特点用途介绍 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

离心机厂家:卧螺机的特点用途介绍 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

  • 分类:行业新闻
  • 作者:离心机厂家
  • 来源:www.njmoniya.cn
  • 发布时间:2021-03-17
  • 访问量:0

【概要描述】离心机厂家:卧螺机是利用离心沉降原理分离悬浮液的设备。它的工作原理是当要分离的悬浮液进入离心机的转鼓里后,比液相密度大的固相颗粒再转鼓的离心力作用下快速沉降到转鼓内壁,离心机内部的螺旋输送器把沉积在转鼓内壁的固相推向转鼓小端的干燥区进一步脱水,然后经出渣口排出,分离后的清液则从转鼓大端流出。

Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment.
It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

离心机厂家:卧螺机的特点用途介绍 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

【概要描述】离心机厂家:卧螺机是利用离心沉降原理分离悬浮液的设备。它的工作原理是当要分离的悬浮液进入离心机的转鼓里后,比液相密度大的固相颗粒再转鼓的离心力作用下快速沉降到转鼓内壁,离心机内部的螺旋输送器把沉积在转鼓内壁的固相推向转鼓小端的干燥区进一步脱水,然后经出渣口排出,分离后的清液则从转鼓大端流出。

Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment.
It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

  • 分类:行业新闻
  • 作者:离心机厂家
  • 来源:www.njmoniya.cn
  • 发布时间:2021-03-17
  • 访问量:0
详情

       离心机厂家:卧螺机是利用离心沉降原理分离悬浮液的设备。它的工作原理是当要分离的悬浮液进入离心机的转鼓里后,比液相密度大的固相颗粒再转鼓的离心力作用下快速沉降到转鼓内壁,离心机内部的螺旋输送器把沉积在转鼓内壁的固相推向转鼓小端的干燥区进一步脱水,然后经出渣口排出,分离后的清液则从转鼓大端流出。

     Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment. It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

卧螺机

       这款卧螺机能在全速运行状态下连续进料、分离、洗涤和卸料。具有结构紧凑、连续操作、运转平稳、适应性强、生产能力大、维修方便等特点。适合分离含固相物粒度大于0.005mm,浓度范围为2-40%的悬浮液。
 

The recumbent screw can continuously feed, separate, wash and discharge at full speed. It has the characteristics of compact structure, continuous operation, smooth operation, strong adaptability, large production capacity and convenient maintenance. It is suitable for separating suspension with solid particle size greater than 0.005mm and concentration range of 2-40%.


离心机厂家:选择合适的卧螺机不仅可以解决生产问题、提高工作效率,同时也节约了生产成本,降低了经营风险。
 

Centrifuge manufacturers: choose the right horizontal screw machine can not only solve the production problems, improve work efficiency, but also save production costs, reduce the risk of operation.
 

卧螺机的特点:

       1、采用渐开线行星齿轮差速器、传动比大、精度高。
       2、整机设有机械电器双重过载保护装置、使用安全。
       3、工频调速型主电机配液力偶合器、电机运转平稳。
       4、与物料接触部选用优质不锈钢材料、耐腐蚀性强。
       5、整机采用整体机架结构、吊装安全方便、占地面积少。

Features of horizontal screw machine:

1. Adopt involute planetary gear differential, with large transmission ratio and high precision.
2, The whole machine is equipped with mechanical and electrical overload protection device, safe in use.
3. The main motor of power frequency speed-adjusting type is equipped with hydraulic coupling, the motor runs smoothly.
4. The contact part with the material is made of high quality stainless steel material with strong corrosion resistance.
5. The whole machine adopts the whole frame structure, which is safe and convenient for hoisting and occupies less area.



卧螺机用途:

       离心机厂家:设备洗涤效果好,处理能力大,经济效率高,它可在全速运转时对悬浮液进行自动连续地进料、洗涤、脱水和卸料。是固液分离中高效的分离设备。这种机器主要适用于化工、制药、食品、治金、矿山等行业固液分离,分离悬浮液固相在10%-80%固相颗粒直径在0.13-5mm(0.2-2mm效果尤佳)范围内的线状或结晶状的固体颗粒。

 

Horizontal screw machine use:

Centrifuge manufacturer: the equipment has good washing effect, large processing capacity and high economic efficiency. It can automatically and continuously feed, wash, dehydrate and discharge the suspension when running at full speed. It is an efficient separation equipment in solid-liquid separation. This machine is mainly used for solid liquid separation in chemical, pharmaceutical, food, gold, mining and other industries. It separates linear or crystalline solid particles in the range of 10%-80% solid phase particle diameter 0.13-5mm(0.2-2mm is the best effect) of suspension liquid.

关键词:

扫二维码用手机看

- 手机版 莫尼亚 -

moniya

南京莫尼亚离心机科技发展有限公司

联系人:13776511759 
电话/传真:025-58474011
邮箱: njmoniya@163.com 

网址:www.njmoniya.cn
公司地址:江苏省南京市六合区竹镇工业园凌峰路71号

售后服务:

南京莫尼亚离心机科技发展有限公司

联系人:赵先生18013344029

常测

Copyright © 2019 南京莫尼亚离心机科技发展有限公司

网站建设:中企动力 南京

苏ICP备05064655