2026年脱脂机全行业应用场景深度解析南京莫尼亚实用选型指南In depth analysis of the application scenarios of degreasing machines in the entire industry in 2026, Nanjing Molnia Practical Selection Guide-南京莫尼亚离心机科技发展有限公司

2026年脱脂机全行业应用场景深度解析南京莫尼亚实用选型指南In depth analysis of the application scenarios of degreasing machines in the entire industry in 2026, Nanjing Molnia Practical Selection Guide

发布时间：

2026-07-22

📋 目录

1. 脱脂机基础定义与核心功能特性
2. 食品加工领域脱脂机核心应用场景
3. 制药行业脱脂机核心应用场景
4. 五金机械加工领域脱脂机核心应用场景
5. 不同场景下脱脂机选型参考数据对比
6. 脱脂机场景适配常见误区说明
7. 脱脂机后期运维通用注意事项

📋 catalogue

1. Basic definition and core functional characteristics of degreasing machine
2. Core application scenarios of degreasing machines in the field of food processing
3. Core application scenarios of degreasing machines in the pharmaceutical industry
4. Core application scenarios of degreasing machines in the field of hardware mechanical processing
5. Comparison of reference data for degreasing machine selection in different scenarios
6. Common Misunderstandings in the Adaptation of Skim Free Airport Scenery
7. General precautions for later operation and maintenance of degreaser

脱脂机是依靠离心力分离物料表面油脂的工业专用处理设备，作为南京莫尼亚离心机科技发展有限公司旗下主力工业设备品类之一，2026年已经广泛应用于超过12个细分工业领域，相比传统溶剂浸泡、人工擦拭的脱脂工艺，可在降低70%耗材使用的前提下提升5倍以上处理效率。

Defatting machine is an industrial specialized processing equipment that relies on centrifugal force to separate surface oil and grease of materials. As one of the main industrial equipment categories under Nanjing Monia Centrifuge Technology Development Co., Ltd., it has been widely used in more than 12 sub industrial fields by 2026. Compared with traditional solvent soaking and manual wiping degreasing processes, it can improve processing efficiency by more than 5 times while reducing the use of consumables by 70%.

1 脱脂机基础定义与核心功能特性

Basic definition and core functional characteristics of degreaser

脱脂机的核心运行逻辑是通过电机带动舱体高速旋转，借助离心作用力快速甩离物料表面附着的各类油脂，目前市面主流机型已经实现全流程自动化运行。

The core operating logic of the degreasing machine is to drive the cabin to rotate at high speed through a motor, and use centrifugal force to quickly shake off various oils and fats attached to the surface of the material. Currently, mainstream models on the market have achieved full process automation operation.

1.1 脱脂机的基础工作原理

1.1 Basic working principle of degreaser

脱脂机是指通过离心作用力实现固液分离，剥离工件或物料表面附着油脂的专用工业设备，设备运行过程中不需要添加额外化学试剂，仅通过物理作用力完成脱脂操作，全程无化学残留风险，完全符合多数工业场景的环保要求。业内普遍认为，2026年国产脱脂机的平均处理精度已经达到国际一线设备的同等水准，核心部件使用寿命相比3年前提升了40%。

Defatting machine refers to a specialized industrial equipment that uses centrifugal force to achieve solid-liquid separation and peel off oil and grease attached to the surface of workpieces or materials. During the operation of the equipment, no additional chemical reagents are required, and only physical force is used to complete the degreasing operation. There is no risk of chemical residue throughout the process, and it fully meets the environmental protection requirements of most industrial scenarios. It is widely believed in the industry that the average processing accuracy of domestically produced degreasing machines in 2026 has reached the same level as international first-line equipment, and the service life of core components has increased by 40% compared to three years ago.

1.2 2026年脱脂机主流技术迭代方向

1.2 The mainstream technological iteration direction of degreasing machines in 2026

2026年最新上市的脱脂机普遍搭载智能调速模块，可根据不同物料的重量、材质自动匹配最优运行转速，不需要人工反复调试参数，新手操作也能快速上手。新款设备还新增了油脂自动回收装置，分离出的油脂可直接接入收集管道，不会造成车间地面油污污染问题。

The latest degreasing machines launched in 2026 are generally equipped with intelligent speed control modules, which can automatically match the optimal operating speed according to the weight and material of different materials. There is no need for manual parameter tuning, and novice operators can quickly get started. The new equipment also adds an automatic oil recovery device, and the separated oil can be directly connected to the collection pipeline, which will not cause oil pollution on the workshop floor.

2 食品加工领域脱脂机核心应用场景

2 Core application scenarios of degreasing machines in the field of food processing

脱脂机是食品加工行业动植物油脂分离、食品原料余油脱除的核心专用设备，目前已经在坚果初加工、油炸食品生产等细分场景得到大规模普及应用。

Defatting machine is a core specialized equipment for separating animal and vegetable oils and removing residual oil from food raw materials in the food processing industry. It has been widely used in segmented scenarios such as nut initial processing and fried food production.

2.1 坚果果仁初加工脱脂应用

2.1 Application of degreasing in initial processing of nuts and kernels

花生、核桃、腰果等高油含量坚果的冷榨前处理环节，使用脱脂机提前脱除部分多余油脂，可有效提升后续压榨工序的出油率，避免原料因油脂含量过高出现粘连结块问题。标准操作流程如下：

In the cold pressing pretreatment stage of high oil content nuts such as peanuts, walnuts, and cashews, a degreaser is used to remove some excess oil in advance, which can effectively improve the oil yield of subsequent pressing processes and avoid the problem of adhesion and agglomeration of raw materials due to high oil content. The standard operating procedure is as follows:

将预处理完成、筛选掉杂质的果仁原料送入脱脂机料舱
设置适配的转速参数与运行时长，启动设备自动分离多余油脂
脱脂完成后设备自动停止运行，统一收集处理好的原料与分离出的可回用油脂

Send the pre processed and impurity filtered nut raw materials into the defatting machine compartment
Set the appropriate speed parameters and running time, and start the equipment to automatically separate excess oil and grease
After degreasing is completed, the equipment will automatically stop running and collect the processed raw materials and separated reusable oils and fats uniformly

2.2 膨化食品余油回收应用

2.2 Application of residual oil recovery from puffed food

薯片、江米条、油炸点心等膨化食品的生产环节，刚出锅的产品表面会附着大量多余煎炸油，使用脱脂机快速脱除表面余油，可将产品最终含油率控制在20%以内，既能改善产品口感，也能大幅延长产品保质期，降低油脂耗材的使用成本。

In the production process of puffed food such as potato chips, rice chips and fried Dim sum, a large amount of extra frying oil will be attached to the surface of the product just out of the pan. Using a degreaser to quickly remove the remaining oil on the surface can control the final oil content of the product within 20%, which can not only improve the taste of the product, but also significantly extend the product shelf life and reduce the use cost of oil consumables.

3 制药行业脱脂机核心应用场景

3 Core application scenarios of degreasing machines in the pharmaceutical industry

脱脂机在制药领域属于合规级预处理设备，主要用于中草药原料、药用金属配件的脱脂处理，完全符合制药行业的生产洁净度要求。

The degreasing machine belongs to the compliance level pretreatment equipment in the pharmaceutical field, mainly used for degreasing treatment of Chinese herbal raw materials and medicinal metal accessories, fully meeting the production cleanliness requirements of the pharmaceutical industry.

3.1 中草药有效成分提取前脱脂

3.1 Defatting before extracting effective ingredients from Chinese herbal medicine

部分含油量较高的中草药原料，提取有效成分之前使用脱脂机预先脱除表面油脂，可避免油脂包裹有效成分导致的提取率下降问题，2026年的行业数据显示，经过脱脂预处理的中草药原料，有效成分提取率平均可提升18%左右。

For some Chinese herbal raw materials with high oil content, using a degreasing machine to remove surface oil before extracting effective ingredients can avoid the problem of decreased extraction rate caused by oil wrapping the effective ingredients. Industry data from 2026 shows that the effective ingredient extraction rate of Chinese herbal raw materials treated with degreasing pretreatment can be increased by an average of about 18%.

3.2 药用金属配件预处理脱脂

3.2 Pre treatment and degreasing of medicinal metal accessories

注射器金属针头、医用手术器械等金属配件，电镀、消毒之前需要使用脱脂机完全脱除表面附着的冲压润滑油，避免后续工序出现涂层脱落、消毒不彻底等问题，脱脂处理后的配件清洁度完全符合国家医药级生产标准。

Metal accessories such as syringes, metal needles, and medical surgical instruments need to be completely degreased with a degreaser before electroplating and disinfection to avoid coating peeling and incomplete disinfection in subsequent processes. The cleanliness of the degreased accessories fully meets the national pharmaceutical production standards.

4 五金机械加工领域脱脂机核心应用场景

Core application scenarios of degreasing machines in the field of hardware mechanical processing

脱脂机是五金加工行业工件批量除油的标准配置设备，可大幅提升五金工件的预处理效率，降低人工清洁的综合成本。

Defatting machine is a standard equipment for batch degreasing of workpieces in the hardware processing industry, which can greatly improve the pre-treatment efficiency of hardware workpieces and reduce the comprehensive cost of manual cleaning.

4.1 精密冲压件脱脂清洗

4.1 Degreasing and Cleaning of Precision Stamping Parts

汽车配件、电子精密冲压件完成冲压工序之后，表面会附着大量冲压拉伸油，使用脱脂机可一次性完成整筐工件的脱脂处理，不会对工件表面造成磕碰损伤，处理效率是传统人工清洗的10倍以上。

After the stamping process of automotive parts and electronic precision stamping parts is completed, a large amount of stamping stretching oil will adhere to the surface. The use of a degreasing machine can complete the degreasing treatment of the entire basket of workpieces at once, without causing collision damage to the workpiece surface. The processing efficiency is more than 10 times that of traditional manual cleaning.

4.2 标准紧固件表面脱脂处理

4.2 Standard fastener surface degreasing treatment

螺栓、螺母等标准紧固件表面的防锈油、加工润滑油，可通过工业级脱脂机快速脱除，处理后的工件表面无残留油污，可直接进入后续的喷涂、包装工序，处理后的工件表面洁净度可稳定达标。

The rust proof oil and processing lubricant on the surface of standard fasteners such as bolts and nuts can be quickly removed by an industrial grade degreasing machine. The treated workpiece surface has no residual oil stains and can directly enter the subsequent spraying and packaging processes. The cleanliness of the treated workpiece surface can stably meet the standard.

5 不同场景下脱脂机选型参考数据对比

Comparison of reference data for degreasing machine selection in 5 different scenarios

南京莫尼亚结合2026年大量实测数据，整理了不同应用场景下脱脂机的选型参考参数，方便用户快速匹配适配自己生产需求的设备型号。

Nanjing Molnia has compiled reference parameters for selecting degreasing machines in different application scenarios based on a large amount of measured data in 2026, making it convenient for users to quickly match equipment models that meet their production needs.

对比维度 Comparison Dimension	食品加工场景 Food processing scenarios	制药生产场景 Pharmaceutical production scenario	五金加工场景 Hardware processing scenario
单次最大处理量 Maximum processing capacity per transaction	150kg	100kg	200kg
平均处理效率 Average processing efficiency	3分钟/批次 3 minutes/batch	5分钟/批次 5 minutes/batch	4分钟/批次 4 minutes/batch
单位能耗 energy consumption per unit	2.2kWh/T	3kWh/T	2.5kWh/T
油脂残留率 Oil residue rate	≤1%	≤0.5%	≤2%

主流行业调研数据显示，合理选配适配场景的脱脂机，可帮助生产企业降低约35%的脱脂处理综合成本。
According to mainstream industry research data, selecting degreasing machines that are suitable for different scenarios can help production enterprises reduce the overall cost of degreasing treatment by about 35%.

6 脱脂机场景适配常见误区说明

6 Common Misconceptions in Skim Free Airport Landscape Adaptation

脱脂机选型如果没有结合实际应用场景，很容易出现设备性能过剩、处理效果达不到预期等问题，需要提前规避常见误区。

If the selection of degreasing machine is not combined with practical application scenarios, it is easy to encounter problems such as equipment performance surplus and processing effect not meeting expectations. It is necessary to avoid common misconceptions in advance.

6.1 盲目追求高转速反而降低处理效果

6.1 Blindly pursuing high speed actually reduces processing efficiency

部分用户选购脱脂机时盲目追求最高转速，实际上针对食品类易碎物料，转速过高会导致物料被甩碎，反而造成不必要的原料损耗，结合物料特性选择适配转速区间的设备才是合理方案。

Some users blindly pursue the highest speed when choosing a degreaser. In fact, for fragile food materials, excessive speed can cause the material to be crushed and unnecessary material loss. Choosing equipment that is suitable for the speed range based on the characteristics of the material is a reasonable solution.

6.2 忽视场景防爆要求带来安全隐患

6.2 Neglecting explosion-proof requirements in the scene brings safety hazards

在使用有机溶剂配合脱脂处理的场景，必须选用防爆级脱脂机，普通非防爆机型在这类场景下使用存在电路起火的安全隐患，选购时需要提前明确自己的生产场景的安全要求。

In scenarios where organic solvents are used in conjunction with degreasing treatment, explosion-proof degreasing machines must be selected. Ordinary non explosion-proof models may pose a safety hazard of circuit fire when used in such scenarios. When selecting, it is necessary to clarify the safety requirements of one's own production scenario in advance.

7 脱脂机后期运维通用注意事项

7 General precautions for later operation and maintenance of degreaser

脱脂机的日常运维操作难度较低，按照规范定期维护可大幅延长设备使用寿命，降低长期使用成本。

The daily operation and maintenance difficulty of the degreasing machine is relatively low. Regular maintenance according to specifications can significantly extend the service life of the equipment and reduce long-term usage costs.

7.1 日常使用后基础清洁要点

7.1 Basic cleaning points after daily use

每批次脱脂处理完成后，及时清理设备舱内壁残留的物料碎屑，避免长期堆积后出现腐坏、堵塞出料口等问题，清洁过程中不需要使用腐蚀性强的化学试剂，用干净的抹布擦拭即可。

After each batch of degreasing treatment is completed, promptly clean the residual material debris on the inner wall of the equipment compartment to avoid problems such as decay and blockage of the discharge port after long-term accumulation. During the cleaning process, it is not necessary to use highly corrosive chemical reagents, just wipe with a clean cloth.

7.2 定期部件检查维护要求

7.2 Regular component inspection and maintenance requirements

每累计运行1000小时后，对设备的传动部件、密封件进行常规检查，发现磨损严重的部件及时更换，可有效避免设备运行过程中出现异响、震动过大等异常问题。南京莫尼亚离心机科技发展有限公司提供全系列脱脂机的终身技术支持服务，用户可随时访问官网www.njmoniya.cn咨询相关运维问题。After every 1000 hours of cumulative operation, routine inspections should be conducted on the transmission components and seals of the equipment. If severely worn components are found, they should be replaced in a timely manner, which can effectively avoid abnormal problems such as abnormal noise and excessive vibration during equipment operation. Nanjing Moniya Centrifuge Technology Development Co., Ltd. provides lifelong technical support services for a full range of degreasing machines. Users can visit the official website www.njmoniya.cn at any time to consult related operation and maintenance issues.

常见问题

Frequently Asked Questions

Q：脱脂机日常维护需要注意哪些核心要点？

A：每次使用后及时清理舱内残留物料，定期检查传动部件磨损情况，每运行1000小时更换一次润滑脂即可保障设备稳定运行。

Q: What are the key points to pay attention to in the daily maintenance of the degreasing machine?

A: Clean up residual materials in the cabin promptly after each use, regularly check the wear of transmission components, and replace lubricating grease every 1000 hours of operation to ensure stable operation of the equipment.

Q：小型加工车间适合选配多大处理量的脱脂机？

A：日处理量1吨以下的小型加工车间，可选择单次处理50-100kg的机型，完全可以满足日常生产的脱脂需求。

Q: What is the suitable capacity for selecting a degreasing machine in a small processing workshop?

A: Small processing workshops with a daily processing capacity of less than 1 ton can choose models with a single processing capacity of 50-100kg, which can fully meet the degreasing needs of daily production.

Q：脱脂机分离出的油脂能否回收二次利用？

A：符合回收标准的食品级、工业级油脂可通过配套收集装置统一回收，经过滤处理后可实现二次利用，降低企业生产成本。

Q: Can the oil separated by the degreaser be recycled and reused?

A: Food grade and industrial grade oils that meet recycling standards can be uniformly collected through supporting collection devices, and after filtration treatment, they can be reused to reduce production costs for enterprises.

Q：脱脂机运行过程中会不会产生很大噪音？

A：2026年新款脱脂机普遍搭载减震降噪模块，正常运行过程中的噪音可控制在70分贝以内，完全符合车间环保噪音标准。

Q: Will the degreaser produce a lot of noise during operation?

A: The new degreasing machines in 2026 are generally equipped with shock absorption and noise reduction modules, and the noise during normal operation can be controlled within 70 decibels, fully meeting the workshop's environmental noise standards.

上一个

下一个

上一个：

下一个：